Pro-Care Marine Antifouling

Established 2003

Runaway Bay Gold Coast Australia

Ph: 0434 206 788

Pro-Care Logo
Pro-Care Logo

Operating from Runaway Bay (Runaway Bay Marina),  Southport (Southport Yacht Club) and Hope Island (Boatmasters) on Australia‚Äôs Gold Coast, Pro-Care Marine Antifouling provides top quality workmanship and products on every job.

International Paints

Pro-Care Marine Antifouling Gold Coast  provides a thorough and professional, yet cost effective boat  antifouling service to ensure your vessel performs to its maximum capacity.

pro-Care Antifouling

Our re-antifouling quotes are "all inclusive" of haul out & return, hardstand days (size dependent, no. of days confirmed with quote), water blast, environmental levy, hull waterline staining acid wash, hull, skin fittings/strainers & running gear preparation (further water blasting, scraping, wet sanding, spot priming any bare patches, stern drive legs we raise, lower and turn side to side multiple times during the cleaning, preparation and antifouling process), application of 2 coats of high performance antifouling coatings, materials, labour and GST.

We carry out a general check of everything below waterline, if we find anything such as chips or gauges, blisters, osmosis, broken transducers etc. we will let you know and provide any quotes.

Eroded Anode replacements as required are additional and we will price separately.

Our general recommendation for re-antifouling, anodes checked/replaced and a general check of everything below waterline is every 12-18 months, and aluminium hull vessels every 12-15 months

We also provide first time (clean skin) antifouling procedures which include setting antifoul line, sanding, cleaning, 2 coats of epoxy primers.

Hull, & (whole exteriors of smaller vessels) buff polishing and waxing is also available.


Propspeed demo

Propspeed is a catalysed etch primer + silicone based top coat antifouling system designed for use on metal underwater running gear.

Propspeed has very low friction with water, its finish is similar to that of glass. 

Benefits of having Propspeed applied are:

  • Increased engine revs (across all ranges)
  • Increased fuel economy
  • Increased boat speed
  •  Superior adheasion to metal

Making Prospeed a viable upgrade for your boat's performance.

Our process:
Strip old propspeed or antifoul back to bare metal, clean with Propclean, condition metal with Propprep, apply 2 coats of Propspeed 2 pack gold coloured yellow/gold etching primer followed by Propspeed clear coat in the manufactures specified time frame to achieve a strong chemical bond.

To discuss your wishes and obtain a quote: